Projector Throw Distance for a 100 Inch Screen
Calculate approximate lens-to-screen distance for a 100-inch image, then check the model’s throw range and mounting diagram.
Use image width in the calculation
For a 100-inch diagonal 16:9 image, the picture is about 2.21 metres wide. Multiply image width by throw ratio to estimate the lens-to-screen distance. A hypothetical projector with a fixed 1.20:1 throw ratio would need about 2.65 metres from lens to screen. That example is a calculation, independent of any DUVIX model.
Check the whole mounting range
If the model lists a range of throw ratios, calculate both ends. Measure from the point shown in the manufacturer’s installation diagram. Lens position, vertical offset and cabinet depth affect where the projector and screen can actually sit. Ultra-short-throw models often have model-specific placement diagrams.
Mark the screen before drilling
Use masking tape to outline the image and check furniture, light fittings and cable routing. Test the intended mount position with the chosen projector before making permanent changes. Read the dimension drawing for both the projector and the screen frame.
Browse projector screens → · Request a quote →
What to test first
Use the width of the 100-inch image and the model’s throw ratio. Measure from the lens or use the maker’s UST placement diagram where applicable.